If you wish to create a VPN server without Synology NAS. Once connected, all traffic from Windows 11 would be routed through the VPN server configured in Synology NAS. Click “Add VPN” and provide the connection details, IP Address of Synology NAS, Pre-shared Key that was used while configuring VPN and a Username & Credentials of a User Account in Synology NAS.Ĭlick the “Connect” button to establish the connection with the VPN Server. To configure VPN client in Windows 11, Open Settings => Network & internet => VPN to add a new VPN connection. The next step is to configure a client to connect to the VPN server. Click the “Apply” button and save the changes. IP addresses for connecting clients are assigned based on the “Dynamic IP Address” set in this screen. Leave the other options to the default values.
Also, ensure that “Run in kernel mode” is enabled and the “Authentication” is set to “MS-CHAP-v2”. Set up your Synology NAS as a VPN server to allow secure and remote access to rescourses shared within the local network of your NAS VPN can then use DS116’s authentication setup to control the access, However to enable the client certificate access other than using user name, password, we need to do some custimzations VPN Plus Server is an. Next, select the “Enable L2TP/IPSec VPN Server” option and provide a password for the “Pre-shared key”. To configure the L2TP/IPSec VPN Server in Synology NAS, open the VPN application and navigate to the “L2TP/IPSec” located under the “Set up VPN Server” section. Plus, it gives you access to your network with minimal effort and without.
#Synology vpn plus client install
Click the “Install” button of the “VPN Server” application to install the application. The Synology SSL VPN and WebVPN allow for minimal setup, as well as client setup. The search result displays the official “VPN Server” application of Synology. In a Synology NAS, the “VPN Server” application is not installed or enabled by default. With this approach, the L2TP packets are encapsulated by IPSec (Internet Protocol Security), and the actual source and destination IP address is encrypted within the Packet. L2TP( Layer 2 Tunnelling Protocol) is a tunnelling protocol, usually implemented along with IPSec.
#Synology vpn plus client how to
Let us see how to configure an L2TP/IPSec VPN server in Synology NAS for a LAN network and connect a Windows 11 client to that VPN Server.
0 kommentar(er)
